- Orçamento Rápido
- +86 18295370559
- +86 18295370559
- E-mail: info@cncfixtech.com
Várias opções de envio!
$700.00
Você receberá um e-mail confirmando que recebemos sua consulta.
Nosso gerente profissional de pré-vendas entrará em contato com você em até um dia útil para confirmar suas necessidades e oferecer suporte técnico.
Forneceremos a você a cotação mais atualizada do produto e também uma solução completa
O FANUC A06B-6110-H026 (αiPS26) is a high-performance power supply module designed for FANUC αi Series CNC systems. It provides stable DC power for servo and spindle amplifiers, ensuring reliable machine tool performance. CNCFixtech offers new, used, and refurbished units — each fully tested before shipment. New products include a 12-month warranty, refurbished units come with a 6-month warranty, and used products include a 3-month warranty. Extended warranty options are also available upon request.
Parâmetro | Detalhes |
| Modelo | A06B-6110-H026 |
| Série | FANUC αiPS26 Power Supply |
| Tensão de entrada | 200–240V |
| Tensão de saída | 283-339V |
| Rated Output Power | 29.8 kW |
| Cooling | Forced air |
| Compatible Drives | FANUC αi Series Servo and Spindle Amplifiers |
| Condição | New / Refurbished / Used |
| Garantia | 12 Months / 6 Months / 3 Months |
| Disponibilidade | In Stock |
| Testing | 100% functional test before shipment |
The FANUC A06B-6110-H026 and A06B-6140-H026 power supply modules share identical electrical and performance specifications within the FANUC αi Series. The only difference lies in their internal control board design. The A06B-6110-H026 is equipped with control board A20B-2100-0761, while the A06B-6140-H026 uses control board A20B-2100-0391. Both models provide the same power capacity, input/output voltage range, and compatibility with FANUC αi servo and spindle amplifiers. When replacing or repairing these units, it is important to match the control board version to ensure proper communication with the connected drive and CNC controller.
Below are some common faults that may occur in FANUC αi series power supply modules such as A06B-6110-H026 (αiPS26).
All of these issues can be diagnosed and repaired by CNCFixtech technicians.
For detailed troubleshooting steps and solutions, please visit our FANUC Power Supply Alarm Guide
| Fault Code / Symptom | Descrição | Possible Cause |
|---|---|---|
| PIL indicator not lit | Control power is ON but PIL lamp does not light | No AC input or faulty power circuit |
| MCC not engaging | Control power ON but MCC not activated | Emergency stop not released or contactor issue |
| STATUS shows alarm code | 7-segment display shows error number | Internal fault in power module |
| Alarm 01 | IPM or IGBT failure in main circuit | Faulty IGBT/IPM or defective AC reactor |
| Alarm 02 | Cooling fan not rotating | Cooling fan failure |
| Alarm 03 | Heatsink over-temperature | Fan failure or poor cabinet ventilation |
| Alarm 04 | DC voltage too low | Input voltage drop or wrong operation sequence |
| Alarm 05 | Charge not completed in time | DC short or faulty charging resistor |
| Alarm 06 | Input power abnormal | Missing input phase |
| Alarm 07 | DC voltage too high | Abnormal regenerative circuit or IGBT fault |
Tip: If your power supply module shows any of the above issues, CNC Fixtech can provide full testing, fault analysis, and repair services.
Para conhecer mais casos reais de reparos e informações técnicas, confira nosso Canal do YouTube
— we regularly share FANUC power supply troubleshooting and repair videos.
Both models share identical power specifications. The only difference is the control board:
They are otherwise interchangeable in terms of power output and compatibility.
All products are fully tested before shipment, and extended warranty options are available upon request.
Yes. CNC Fixtech provides full diagnostic, repair, and testing services for FANUC power supplies, including A06B-6110-H026 and A06B-6140-H026. Each repaired unit is tested before shipment.
“Mais do que apenas um fornecedor de máquinas-ferramentas CNC; somos um parceiro de confiança, comprometido em ajudar nossos clientes a alcançar suas metas de fabricação.”
“Temos orgulho de oferecer produtos confiáveis e um atendimento ao cliente excepcional.“
“Demonstramos nossas técnicas especializadas de reparo do início ao fim.”
“Temos muita confiança na qualidade de cada um dos nossos produtos.”
Envie-nos uma mensagem pelo WhatsApp
+8618295370559
+8618302244720
Envie-nos um e-mail
info@cncfixtech.com
repair@cncfixtech.com
Avaliações
Não há avaliações ainda.